NOTE: This mount does require a significant amount of time to assemble (about 20 min). The wall plate and TV plate both come disassembled in the box. Also, the wall plate, once assembled, will not sit flush against the wall until the mount is secured tightly to the wall with all 4 lag bolts into the studs. This was done on purpose so as to create tighter tolerances in the wall plate pieces. The
Tolerances also make assembly somewhat difficult. Because the holes and the
bolts fit together tight, it is harder to assemble but has less sag once
This is a very substantial mount with dual arms and heavy gauge steel. The arms extend over 20" from the wall yet folds to less than 2.75". Even at full extension, this mount has very little sag or twist.
It is rated for up to 165 lbs. and most displays 65" and smaller weighing under 100 lbs.
The unit has dual tilt adjustment and tilts forward or back 15°. The wall plate is 27.5" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart.
The universal design will fit any display with a hole pattern up to 26.3" wide and 17" tall. The wall plate is 1/8" thick, very stable, and includes large center spaces for cable pass-though into the wall. This mount will swivel approximately 180° depending on the size of the display. Dual TV safety screws are included to prevent accidental liftoff of the display.
Installation instructions and hardware included. This mount also includes one 10' 1.4 HDMI Cable capable of 3D, 1080P, and 4K 2160P Ultra HD signals and Ethernet. This is an upgraded cable and similar cables sell for $15-$25.
LIFETIME 100% GUARANTEE
All our mounts come with a lifetime guarantee. If you experience any issues, please contact us