Home > MOUNT TYPE > 32 to 65" >

  Cheetah Mounts APTMM2B Flush Tilt (1.3” Profile) TV Wall Mount Bracket for 32-65 inch LED, LCD and Plasma Flat Screen TVs Up To VESA 684x400 and 165lbs, Including a Twisted Veins 10' Braided High Speed with Ethernet HDMI Cable and a 6” 3-Axis Magnetic Bub

 
Alternative Views:


Our Price: $29.95

Product Code: APTMM2B
Qty:

  
Description Extended Information
 

Features


  • · Fits Essentially All 32-65” TVs up to VESA 684x400 and 165lbs

    · Flush-Tilt design is only 1.3" from wall yet still tilts for better viewing and reduced glare

    · Stronger with Less Metal GREEN design

    · Fits 16 And 24" Wooden Studs plus Masonry and allows for 3 degrees of Rotation Adjustment

    · Includes a Twisted Veins 10' Braided High Speed with Ethernet HDMI cable and a 6” 3-axis Magnetic Bubble Level

Average Customer Review: 4 of 5 | Total Reviews: 4 Write a review.


  0 of 0 people found the following review helpful:
 
Too Big for 32" Samsung October 28, 2010
Reviewer: RayP from STATEN ISLAND, NY United States  
Not good buy for 32" Samsung LCD because the arms stick out. Also, screws were too long, so had to buy longer screws and use spacers. It was very sturdy and would be great buy for larger sets, but not for this set.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Good Product for Decent Price June 1, 2010
Reviewer: Danny T from santa clara, CA United States  
I purchased these through an ebay daily deals for pretty darn cheap so I got it.

I mounted my 55" LG 55LH40 on it which weighs about 80 pounds.

Mounting this thing is pretty simple if you can find your studs.  Use a stud censor or the like.  This item comes with a level which you SHOULD Use and with all needed hardware.

There is a bubble built into the wall mount but do NOT use it.  I did and guess what, the bubble is installed crooked in the wall mount.  So when i stepped back my mount was crooked.  I honestly have no idea why it even comes with a bubble built into the mount.

Besides that, the instructions could have been better in case someone is pretty dense.

Either way, it's been a few days and my TV Is still on the wall and I'm happy.

Also to adjust the tilt, you have to take the TV off the mount and adjust.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Excellent Product December 17, 2009
Reviewer: Barry Kelly from MS, United States  
I did a lot of research on tv mounts before purchasing yours. I found multiple bad reviews on other websites concerning this product. I just wanted to add from my experience that it arrived quickly, all parts WERE included, instructions were very clear, and I'm enjoying my 42" Panasonic mounted with your product. For those shoppping use your money wisely, don't spend the $100's for any other product that will do the same thing as this one.
Thanks, Cheetahmounts for offering an exceptional product at an affordable price.

Was this review helpful to you?

  4 of 4 people found the following review helpful:
 
wall mount August 4, 2009
Reviewer: shawn gray from frederick, MD United States  
This was by far the easiest thing I have done since moving into my house. The bubble level that is built in was perfect. It saved time ,rather than having to have a level on top of the mount.
The hardest thing was finding the studs in the wall! I would recomend these to anybody that wants a good solid mount at a great price.

Was this review helpful to you?


Browse for more products in the same category as this item:

MOUNT TYPE > 32 to 65"
Multi shelves > MOUNT TYPE > Tilt / flat mount
MOUNT TYPE
Multi shelves > MOUNT TYPE
MOUNT TYPE > Flat/Tilt Mount